SSG series These wet or dry gas compression and treatment stations are designed into an easy handling skid composed of a two stage oil-injected rotary gas screw block, directly coupled to an electric motor through a flexible coupling inverter controlled. Adicomp is pleased to announce that it has developed and produced, together with its parent… Continue reading SSG series
Application: Biogas upgrading
UVG200/UVG110-Italy
BIOGAS COMPRESSORS UVG200/ UVG110 UVG 200 LOCATION: ITALYFLUID: Biogas POWER INSTALLED: 340 HpINLET PRESSURE: 5,8 psi(g)WORKING PRESSURE: Up to 203 psi(g)FLOW RATE: 0<429<869 SCFMAMBIENT TEMPERATURE: +14/+104 °F UVG 110 LOCATION: ITALYFLUID: Biogas POWER INSTALLED: 220 HpINLET PRESSURE: 5,8 psi(g)WORKING PRESSURE: Up to 203 psi(g)FLOW RATE: 0<237<475 SCFMAMBIENT TEMPERATURE: +14/+104 °F Two screw biogas compressors for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation,… Continue reading UVG200/UVG110-Italy
UVG250-Italy
BIOGAS COMPRESSOR UVG250 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 430 HpINLET PRESSURE: 5,8 psi(g)WORKING PRESSURE: Up to 232 bar(g)FLOW RATE: 0<503<1006 SCFMAMBIENT TEMPERATURE: +14/+104 °F Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. Air-cooled,completed with heat recovery, temperature control, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise… Continue reading UVG250-Italy
UVG132-France
BIOGAS COMPRESSOR UVG132 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 220 HpINLET PRESSURE: 2,2 psi(g)WORKING PRESSURE: Up to 261 psi(g)FLOW RATE: 0<200<400 SCFMAMBIENT TEMPERATURE: +14/+104 °F Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fine filtration, fully electrical by-pass system and controlled by PLC.
BVG160-USA
BIOGAS COMPRESSOR BVG160 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 270 HpINLET PRESSURE: 1,5 psi(g)WORKING PRESSURE: Up to 130,5 psi(g)FLOW RATE: 0<374<749 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, temperature control, fine filtration and controlled by PLC.
UVG160-France
BIOGAS COMPRESSOR UVG160 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 220 HpINLET PRESSURE: 2,2 psi(g)WORKING PRESSURE: Up to 203 psi(g)FLOW RATE: 0<299<599 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
UVG500-Netherlands
BIOGAS COMPRESSOR UVG500 LOCATION: NETHERLANDSFLUID: BiogasPOWER INSTALLED: 850 HpINLET PRESSURE: 1,4 psi(g)WORKING PRESSURE: Up to 224,8 psi(g)FLOW RATE: 0<829<1657 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation. It is water-cooled ,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
UVG250-France
BIOGAS COMPRESSOR UVG250 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 2x 430 hpINLET PRESSURE: 2,2 psi(g)WORKING PRESSURE: Up to 239,3 psi(g)FLOW RATE: 0<423<846 SCFMAMBIENT TEMPERATURE: +14/+104 °F Two single-stage compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. Equipped with fully electrical by-pass system, heat recovery, temperature control and controlled by PLC.
UVG200-France
BIOGAS COMPRESSOR UVG200 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 340 hpINLET PRESSURE: 5,8 psi(g)WORKING PRESSURE: Up to 203 psi(g)FLOW RATE: 0<435<869 SCFMAMBIENT TEMPERATURE: +14/+104 °F Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with bleed valve, heat recovery, temperature control, electro-pneumatic by pass valve and it is equipped with silencers.
BVG90-India
BIOGAS COMPRESSOR BVG90 LOCATION: INDIAFLUID: BiogasPOWER INSTALLED: 2×150 hpINLET PRESSURE: 12,3 psi(g)WORKING PRESSURE: Up to 123,3 psi(g)FLOW RATE: 0<271<542 SCFMAMBIENT TEMPERATURE: +32/+104 °F Two screw biogas compressors for upgrading located in India. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with bleed valve and controlled by PLC. It is equipped with electro-pneumatic by pass valve.