BVG/UVG series

These wet gas compression and treatment stations are designed into an easy handling skid composed of an oil-injected rotary gas screw block, directly coupled to an electric motor through a flexible or magnetic coupling inverter controlled.
Based on the application and on the operating pressure required, our compressors can be classified in:
• BVG: available operating pressures from 3.0 bar(g) to 10.0 bar(g).
• UVG: available operating pressures from 8.0 bar(g) to 25.0 bar(g).

HOW IT WORKS
The wet gas is sucked through a suction filter acting also as a water separator with automatic condensate drain system, then the gas passes through a suction valve. All the components in contact with the gas are made in stainless steel or duly protected, due to the presence of H2S, CO2 and other aggressive contaminants into the gas. During the gas compression process, the oil is injected inside the rotary screw chamber to perform three main functions: lubrication, sealing and heat absorption. Working in a close circuit with a gas/oil receiver, oil is pressurized to flow through an oil cooler, then filtered before being injected again into the screw compression chamber.
The gas flows through the minimum pressure /no-return valve into a cooler and it is treated before leaving the package.

OPERATING PRESSURE
up to 25 bar(g)

FREE GAS DELIVERY
up to 6.000 Nm3/h

ADSORBED POWER
up to 710 kW

REFERENCES

Model UVG 200

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
View more

Model BVG 45

Turkey

Screw biogas compressor for upgrading located in Turkey. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass valve, heat recovery and controlled by PLC.
View more

Model VG 15

Mexico

Screw dry natural gas compressor installed in a hydrogen production plant in Mexico. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with fine filtration, mechanical by-pass valve and controlled by S1-20.
View more

Model UVG 75

France

Two screw biogas compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, heat recovery, silenciers and controlled by PLC.
View more

Model UVG 110

France

Two screw biogas compressors for upgrading located in France. Designed for classified Atex Zone 2 for indoor installation, completed with fully electrical by-pass valve and controlled by PLC.
View more

Model UVG 700

USA

Two open frame screw compressors for biogas upgrading installed inside two separated containers (40’) in USA. Designed in compliance with US standards. They are suitable for outdoor installation, water-cooled, designed with special gas screw equipped with mechanical oil seal and controlled by PLC.
View more

Model ADILR9-30

France

Two-stage oil-free reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for indoor installation, completed with electrical by-pass valve and controlled by PLC.
View more

Model UVG 400

USA

Two screw compressors for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for outdoor installation, air-cooled, equipped with suction heat exchanger, post-compression treatment, electromechanical by-pass system and controlled by PLC.
View more

Model HVG 18.5

Netherlands

Screw compressor designed for hydrogen destined for the Dutch market. It is air cooled, designed for indoor installation, completed with fine oil removal, by-pass valve and controlled by PLC.
View more

Model UVG 160

France

Screw compressor water cooled, for biogas upgrading located in France. Designed for classificated Atex Zone 2 for indoor installation, completed with fine oil removal and controlled by PLC.
View more

OTHER PRODUCTS

VGE series

View more

VG series

View more

ADI70/115 series

View more

BVG/UVG series

View more

Contact us

Write us for support or information

Consent