HYDROGEN & SYNGAS COMPRESSOR HVG90 LOCATION: FRANCEFLUID: SyngasPOWER INSTALLED: 150 hpINLET PRESSURE: 1,5 psi(g)WORKING PRESSURE: Up to 217,5 psi(g)FLOW RATE: 0<168<214 SCFMAMBIENT TEMPERATURE: +14/+104 °F Screw compressor for syngas, with a content of 40% of hydrogen, destined for the French market. Designed for classified Atex Zone 2 for indoor installation. It is water cooled completed with electropneumatic by-pass valve and controlled… Continue reading HVG90-France
Application: Hydrogen and Syngas
HVG series
HVG series These gas compression and treatment stations are designed into an easy handling skid composed of an oil-injected rotary gas screw block, directly coupled to an electric motor through a flexible or magnetic coupling controlled by an inverter. They are designed using suitable materials and technologies for compressing this particular type of gas. •… Continue reading HVG series
VG15-Mexico
BIOGAS COMPRESSOR VG15 LOCATION: MEXICOFLUID: Dry natural gasPOWER INSTALLED: 20 hp INLET PRESSURE: 8,7-29 psi(g)WORKING PRESSURE: Up to 304,6 bar(g)FLOW RATE: 0<44<47 SCFMAMBIENT TEMPERATURE: +14/+104 °F Screw dry natural gas compressor installed in a hydrogen production plant in Mexico. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with fine filtration, mechanical by-pass valve and controlled by S1-20.
HVG18.5-Netherlands
HYDROGEN COMPRESSOR HVG18.5 LOCATION: NETHERLANDSFLUID: HydrogenPOWER INSTALLED: 30 hpINLET PRESSURE: 0 psi(g)WORKING PRESSURE: Up to 152,3 psi(g)FLOW RATE: 0<27<53 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F Screw compressor designed for hydrogen destined for the Dutch market. It is air cooled, designed for indoor installation, completed with fine oil removal, by-pass valve and controlled by PLC.