ADI70/115 series
These gas compression stations are designed onto an easy handling skid composed of a multi stage reciprocating pump, belt driven by an electric motor inverter controlled.
• ADI70: available operating pressures up to 90.0 bar(g).
• ADI115: available operating pressures up to 90.0 bar(g).
HOW IT WORKS
Single or double acting horizontal reciprocating gas compressor. It is designed with one or two conrods and several sizes of cast iron cylinders to be adaptable to different solutions. It can be a single, double or three stages unit, installed on an adequate steel structure. Complete with:
• suction valve
• cross -head
• inter-stage and final air-cooled fan assisted after-cooler
• coalescent type oil filter
• shut-off valves at suction and discharge
• safety valves at each stage
All necessary instrumentation is included in accordance with manufacturer standard.
A proportional by-pass valve is used to recirculate the excess gas to reduce the flow rate from the value at minimum motor speed down to 0%.
OPERATING PRESSURE
up to 90 bar(g)
FREE GAS DELIVERY
up to 1.700 Nm3/h
ADSORBED POWER
up to 160 kW
REFERENCES
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
View more
Model BVG 45
Turkey
Screw biogas compressor for upgrading located in Turkey. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass valve, heat recovery and controlled by PLC.
View more
Model VG 15
Mexico
Screw dry natural gas compressor installed in a hydrogen production plant in Mexico. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with fine filtration, mechanical by-pass valve and controlled by S1-20.
View more
Model UVG 75
France
Two screw biogas compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, heat recovery, silenciers and controlled by PLC.
View more
Model UVG 110
France
Two screw biogas compressors for upgrading located in France. Designed for classified Atex Zone 2 for indoor installation, completed with fully electrical by-pass valve and controlled by PLC.
View more
Model UVG 700
USA
Two open frame screw compressors for biogas upgrading installed inside two separated containers (40’) in USA. Designed in compliance with US standards. They are suitable for outdoor installation, water-cooled, designed with special gas screw equipped with mechanical oil seal and controlled by PLC.
View more
Model ADILR9-30
France
Two-stage oil-free reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for indoor installation, completed with electrical by-pass valve and controlled by PLC.
View more
Model UVG 400
USA
Two screw compressors for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for outdoor installation, air-cooled, equipped with suction heat exchanger, post-compression treatment, electromechanical by-pass system and controlled by PLC.
View more
Model HVG 18.5
Netherlands
Screw compressor designed for hydrogen destined for the Dutch market. It is air cooled, designed for indoor installation, completed with fine oil removal, by-pass valve and controlled by PLC.
View more
Model UVG 160
France
Screw compressor water cooled, for biogas upgrading located in France. Designed for classificated Atex Zone 2 for indoor installation, completed with fine oil removal and controlled by PLC.
View more
