SSG series

SSG series These wet or dry gas compression and treatment stations are designed into an easy handling skid composed of a two stage oil-injected rotary gas screw block, directly coupled to an electric motor through a flexible coupling inverter controlled. Adicomp is pleased to announce that it has developed and produced, together with its parent… Continue reading SSG series

ADLR9-45-Turkey

WELLHEAD GAS ADLR9-45 LOCATION: TurkeyFLUID: Wellhead gasPOWER INSTALLED: 91 hpINLET PRESSURE: 0<20,3 psi(g)WORKING PRESSURE: Up to 348 psi(g)FLOW RATE: 0<246 Nm³/hAMBIENT TEMPERATURE: -11,2/+107,6 °F Two of five three stages reciprocating compressors for wellhead gas. Engineered with gas engine and local control panel equipped with PLC and suitable for classified area zone 2. Designed for outdoor installation and with by-pass valve for flow… Continue reading ADLR9-45-Turkey

BVG355-Croatia

WELLHEAD GAS COMPRESSOR BVG355 LOCATION: Okoli, CroatiaPOWER: 488hp electric engineINLET PRESSURE: up to 58 psi(g)WORKING PRESSURE: 94,3 psi(g)MAX FLOW RATE: 0<2181 SCFMAMBIENT TEMPERATURE: -4/+104 °F Wellhead gas compressor open frame with inlet scrubber able to remove up to 20 m3 of water. Equipped with inlet pressure control valve in order to reduce down to 2,9 psi(g). Installed in area classified as… Continue reading BVG355-Croatia

BVG110-Croatia

WELLHEAD GAS COMPRESSOR BVG110 LOCATION: Zutica, CroatiaPOWER: 150 hp electric engineINLET PRESSURE: up to 58 psi(g)WORKING PRESSURE: 72,5 psi(g)MAX FLOW RATE: 0<810 SCFMAMBIENT TEMPERATURE: -4/+104 °F Wellhead gas compressor open frame with inlet scrubber able to remove up to 9 m3 of water. Equipped with inlet pressure control valve in order to reduce down to 2,9 psi(g). Installed in area classified… Continue reading BVG110-Croatia

BVG250- Romania

WELLHEAD GAS COMPRESSOR BVG250 LOCATION: RomaniaFLUID: Wellhead gasTYPE OF COMPRESSOR: oil-flooded screwMAIN DRIVER: 230 kW gas engineSUCTION PRESSURE: 0,7-2 bar(g)DISCHARGE PRESSURE: 17 bar(g)FLOW RATE: 0<2450 Nm³/h Wellhead gas compressor in operation since 2014 in Romania.

Contact us

Write us for support or information