![Biogas compressor UVG132 France](https://adicomp.us/wp-content/uploads/2023/09/Senza-titolo-1.jpg)
BIOGAS COMPRESSOR
UVG132
LOCATION: FRANCE
FLUID: Biogas
POWER INSTALLED: 220 Hp
INLET PRESSURE: 2,2 psi(g)
WORKING PRESSURE: Up to 261 psi(g)
FLOW RATE: 0<200<400 SCFM
AMBIENT TEMPERATURE: +14/+104 °F
Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fine filtration, fully electrical by-pass system and controlled by PLC.
[contact_form]
OTHER REFERENCES
UVG 160
USA
![](https://adicomp.us/wp-content/uploads/2024/09/WEBSITE-UVG160-usa.jpg)
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
View more
ADI115-22
Czech Republic
![](https://adicomp.us/wp-content/uploads/2024/07/Adi115-czech.jpg)
Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
View more
ADI115-30
Netherlands
![](https://adicomp.us/wp-content/uploads/2024/07/adi115-netherlands.jpg)
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
View more
UVG 650
Denmark
![](https://adicomp.us/wp-content/uploads/2024/07/uvg650-dmt.jpg)
Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve, and are controlled by PLC.
View more
UVG 18.5
Germany
![](https://adicomp.us/wp-content/uploads/2024/07/UVG-18.5-germany.jpg)
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
View more
VG 55
Germany
![](https://adicomp.us/wp-content/uploads/2024/06/vg55-germany.jpg)
Screw compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
View more
UVG 355
Italy
![](https://adicomp.us/wp-content/uploads/2024/06/uvg355-italy.jpg)
Screw compressor for biogas upgrading located in Italy. Designed for outdoor installation. It is water cooled and completed with temperature control, fully electrical by-pass system, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise level to 75 dB@ 10m.
View more
BVG315/ADI115
France
![](https://adicomp.us/wp-content/uploads/2024/05/UVG315-ADI115.jpg)
Two compressors located in France. The first is a screw compressor for biogas upgrading. It is air-cooled and equipped with fine filtration, heat recovery, temperature control, an electro-pneumatic bypass system, and controlled by a PLC. The second is a two-stage reciprocating compressor for biomethane grid injection. It is also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, and controlled by a PLC. Both compressors are designed for classified ATEX Zone 2 for outdoor installation (14/+104 °F).
View more
BVG315/ADI115
France
![](https://adicomp.us/wp-content/uploads/2024/05/UVG315-ADI115.jpg)
Two compressors located in France. The first is a screw compressor for biogas upgrading. It is air-cooled and equipped with fine filtration, heat recovery, temperature control, an electro-pneumatic bypass system, and controlled by a PLC. The second is a two-stage reciprocating compressor for biomethane grid injection. It is also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, and controlled by a PLC. Both compressors are designed for classified ATEX Zone 2 for outdoor installation (14/+104 °F).
View more
BVG 30
Czech Republic
![](https://adicomp.us/wp-content/uploads/2024/05/BVG30.jpg)
Screw biogas compressor for upgrading located in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and equipped with medium filtration, bleed valve for depressurization to vent, mechanical by-pass valve and controlled by PLC. To reduce the compressed gas temperature, a chiller was provided along with the compressor.
View more