UVG355-Italy

BIOGAS COMPRESSOR UVG355 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 610 hpINLET PRESSURE: 2,5 psi(g)WORKING PRESSURE: Up to 203 psi(g)FLOW RATE: 0<655<1310 SCFMAMBIENT TEMPERATURE: 14/+104 °F Screw compressor for biogas upgrading located in Italy. Designed for outdoor installation. It is water cooled and completed with temperature control, fully electrical by-pass system, fine filtration and controlled by PLC. It… Continue reading UVG355-Italy

UVG132/BVG30-Lithuania

BIOGAS COMPRESSOR / CO2 RECOVERY UVG132/ BVG30 UVG 132   LOCATION: LITHUANIAFLUID: BiogasPOWER INSTALLED: 220 hpINLET PRESSURE: 1,4 psi(g)WORKING PRESSURE: Up to 174 psi(g)FLOW RATE: 0<243<486 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F BVG 30 LOCATION: LITHUANIAFLUID: CO2POWER INSTALLED: 60 hpINLET PRESSURE: 7,6 psi(g)WORKING PRESSURE: Up to 58 psi(g)FLOW RATE: 0<93<187 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F Two screw compressors… Continue reading UVG132/BVG30-Lithuania

UVG315/ADI115-France

BIOGAS COMPRESSOR / RNG GRID INJECTION UVG315/ ADI115 UVG 315   LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 550 hpINLET PRESSURE: 2,2 psi(g)WORKING PRESSURE: Up to 232 psi(g)FLOW RATE: 0<558<1117 SCFMAMBIENT TEMPERATURE: 14/+104 °F ADI 115 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 100 hpINLET PRESSURE: 116<232 psi(g)WORKING PRESSURE: Up to 1015,3 psi(g)FLOW RATE: 0<271<358 SCFMAMBIENT TEMPERATURE: 14/+104 °F Two compressors… Continue reading UVG315/ADI115-France

BVG30-Czech Republic

BIOGAS COMPRESSOR BVG30 LOCATION: CZECH REPUBLICFLUID: BiogasPOWER INSTALLED: 37 kWINLET PRESSURE: 0,87 psi(g)WORKING PRESSURE: Up to 81,2 psi(g)FLOW RATE: 0<62<125 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw biogas compressor for upgrading located in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and equipped with medium filtration, bleed valve for depressurization… Continue reading BVG30-Czech Republic

BVG132/BVG315- France

BIOGAS COMPRESSORS BVG132/ BVG315 3x UVG 132   LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 3x 220 hpINLET PRESSURE: 4,1 psi(g)WORKING PRESSURE: Up to 217,6 psi(g)FLOW RATE: 0<252<504 SCFMAMBIENT TEMPERATURE: -4/+104 °F 2x UVG 315 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 2x 550 hpINLET PRESSURE: 4,1 psi(g)WORKING PRESSURE: Up to 217,6 psi(g)FLOW RATE: 0<623<1246 SCFMAMBIENT TEMPERATURE: -4/+104 °F A plant with… Continue reading BVG132/BVG315- France

BVG45-Poland

BIOMETHANE COMPRESSOR BVG45 LOCATION: POLANDFLUID: BiogasPOWER INSTALLED: 2x 75 hpINLET PRESSURE: 0,7-2,9 psi(g)WORKING PRESSURE: Up to 65,3 psi(g)FLOW RATE: 0<125<249 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F Two screw compressors for biomethane located in Poland. Designed for classified area Atex Zone 2 for indoor installation. They are air cooled and equipped with medium filtration, bleed valve for depressurization… Continue reading BVG45-Poland

UVG90-Italy

CO2 COMPRESSOR UVG90 LOCATION: ITALYFLUID: CO2POWER INSTALLED: 150 hpINLET PRESSURE: 14,5 psi(g)WORKING PRESSURE: Up to 217,6 psi(g)FLOW RATE: 0<204<331 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw biogas compressor for CO2 destined for the Italian market. Designed for installation in safe area outdoors. It is air-cooled and equipped with heat recovery, temperature control, fine filtration and controlled by… Continue reading UVG90-Italy

BVG110-USA

BIOGAS COMPRESSOR BVG110 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 172 hpINLET PRESSURE: 4,4 psi(g)WORKING PRESSURE: Up to 123,3 psi(g)FLOW RATE: 0<283<567 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw compressor for biogas upgrading destinated for US market. Designed in compliance with ASME and UL standards (Class 1 Division 2), for outdoor installation. It is air cooled and including fine filtration,… Continue reading BVG110-USA

BVG200-Colombia

BIOGAS COMPRESSOR BVG200 LOCATION: ColombiaFLUID: BiogasPOWER INSTALLED: 300 hpINLET PRESSURE: 2,9 psi(g)WORKING PRESSURE: Up to 130,5 psi(g)FLOW RATE: 0<282<941 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F Screw compressor for biogas upgrading located in Colombia. Designed for indoor installation, it is water cooled and completed with temperature control, electropneumatic by-pass valve and controlled by PLC.

BVG132/VG75- Latvia

BIOGAS COMPRESSORS / RNG GRID INJECTION BVG132/ VG75 2x BVG 132   LOCATION: LATVIAFLUID: Biogas    POWER INSTALLED: 200 hp (x2)INLET PRESSURE: 4,4 psi(g)WORKING PRESSURE: Up to 116 psi(g)FLOW RATE: 0<374<698 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F VG 75 LOCATION: LATVIAFLUID: Biomethane  POWER INSTALLED: 125 hpINLET PRESSURE: 79,8 psi(g)WORKING PRESSURE: Up to 246,6 psi(g)FLOW RATE: 0<389<779 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F   A complete automatic solution for biogas upgrading and biomethane grid injection consisting… Continue reading BVG132/VG75- Latvia

Contact us

Write us for support or information