BIOGAS COMPRESSORS / RNG GRID INJECTION UVG315/ VG250 2x UVG 315 LOCATION: SPAINFLUID: Biogas POWER INSTALLED: 400 kW (x2)INLET PRESSURE: 50 mbar(g)WORKING PRESSURE: Up to 15 bar(g)FLOW RATE: 0<1850<3700 Nm³/hAMBIENT TEMPERATURE: -10/+40°C VG 250 LOCATION: SPAINFLUID: Biomethane POWER INSTALLED: 315 kW INLET PRESSURE: 50 mbar(g)WORKING PRESSURE: Up to 22.5 bar(g)FLOW RATE: 0<530<1045 Nm³/hAMBIENT TEMPERATURE: -10/+40°C A complete automatic solution for biogas upgrading and biomethane grid injection consisting of:–… Continue reading UVG315/VG250-Spain
Line: BVG/UVG
UVG90-France
BIOGAS COMPRESSOR UVG90 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 110 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 18 bar(g)FLOW RATE: 0<221<442 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with fully electrical by-pass system.
UVG315-Italy
BIOGAS COMPRESSOR UVG315 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 355 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14.5 bar(g)FLOW RATE: 0<700<1680 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with temperature control, fine filtration and controlled by PLC.
UVG355-Netherlands
BIOGAS COMPRESSOR UVG355 LOCATION: NETHERLANDSFLUID: BiogasPOWER INSTALLED: 455 kWINLET PRESSURE: 60 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<956<1912 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC.
UVG110-France
BIOGAS COMPRESSOR UVG110 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 132 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<325<651 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with electro-pneumatic by-pass system.
UVG110-France
BIOGAS COMPRESSOR UVG110 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<460<707 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with heat recovery, temperature control and controlled by PLC. It is equipped with mechanical oil shaft seal & pressurized suction… Continue reading UVG110-France
UVG110-Swiss
BIOGAS COMPRESSOR UVG110 LOCATION: SWISSFLUID: BiogasPOWER INSTALLED: 132 kWINLET PRESSURE: 120 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<297<593 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw biogas compressor for upgrading located in Swiss. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with activated carbon column, temperature control, fine filtration and controlled by PLC.
UVG200-USA
BIOGAS COMPRESSOR UVG200 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 250 kWINLET PRESSURE: 0.135-0.340 bar(g)WORKING PRESSURE: Up to 11.7 bar(g)FLOW RATE: 0<673<1345 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
BVG45-Turkey
BIOGAS COMPRESSOR BVG45 LOCATION: TURKEYFLUID: BiogasPOWER INSTALLED: 55 kWINLET PRESSURE: 200-300 mbar(g)WORKING PRESSURE: Up to 8.5 bar(g)FLOW RATE: 0<190<380 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in Turkey. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass valve, heat recovery and controlled by PLC.
UVG75-France
BIOGAS COMPRESSOR UVG75 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 2×90 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<222<444Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Two screw biogas compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, heat recovery, silenciers and controlled by PLC.