BIOGAS COMPRESSOR

BVG37

LOCATION: La Vergne, France
POWER: 45 kW
INLET PRESSURE: 50 mbar(g)
WORKING PRESSURE: 6.5 bar(g)
MAX FLOW RATE:  0<180<318 Nm³/h
AMBIENT TEMPERATURE: -20/40°C

Full featured compression station designed to feed GE JENBA CHER engines. Equipped with a complete with gas treatment system for water, oil, and dust removal.

[contact_form]

OTHER REFERENCES

Model UVG315/VG250

Spain

Two screw compressors for biogas upgrading installed inside a container (40’) for a total flowrate of 3800 Nm3/h. One screw compressor for biomethane grid injection, in compliance with the Spain requirements for the GRFD. They are designed in compliance with the European standards for classified Atex zone 2, water-cooled, with outlet gas temperature control, fine filtration and remote control by PLC.
View more

Model ADLR9-45

Turkey

Two of five three stages reciprocating compressors for wellhead gas. Engineered with gas engine and local control panel equipped with PLC and suitable for classified area zone 2. Designed for outdoor installation and with by-pass valve for flow rate regulation.
View more

Model UVG 90

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with fully electrical by-pass system.
View more

Model UVG 315

Italy

Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with temperature control, fine filtration and controlled by PLC.
View more

Model UVG 355

Netherlands

Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC.
View more

Model UVG 110

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with electro-pneumatic by-pass system.
View more

Model UVG 110

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with heat recovery, temperature control and controlled by PLC. It is equipped with mechanical oil shaft seal & pressurized suction condensate drainer.
View more

Model UVG 110

Swiss

Screw biogas compressor for upgrading located in Swiss. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with activated carbon column, temperature control, fine filtration and controlled by PLC.
View more

Model UVG 200

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
View more

Model BVG 45

Turkey

Screw biogas compressor for upgrading located in Turkey. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass valve, heat recovery and controlled by PLC.
View more

Contact us

Write us for support or information

Consent