BIOGAS COMPRESSOR
BVG37
LOCATION: Spain
POWER: 60 hp
INLET PRESSURE: 7,3 psi(g)
WORKING PRESSURE: 94,3 psi(g)
MAX FLOW RATE: 0<137<218 SCFM
AMBIENT TEMPERATURE: -4/+104 °F
Biogas compressor to feed OPRA turbines for a power generation plant. Suitable for ATEX zone 2 and outdoor installation (weather proof).
[contact_form]
OTHER REFERENCES
UVG 22
France
Screw compressor for CO₂ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
View more
UVG 160
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
View more
ADI115-22
Czech Republic
Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
View more
ADI115-30
Netherlands
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
View more
UVG 650
Denmark
Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve, and are controlled by PLC.
View more
UVG 18.5
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
View more
VG 55
Germany
Screw compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
View more
UVG 355
Italy
Screw compressor for biogas upgrading located in Italy. Designed for outdoor installation. It is water cooled and completed with temperature control, fully electrical by-pass system, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise level to 75 dB@ 10m.
View more
BVG315/ADI115
France
Two compressors located in France. The first is a screw compressor for biogas upgrading. It is air-cooled and equipped with fine filtration, heat recovery, temperature control, an electro-pneumatic bypass system, and controlled by a PLC. The second is a two-stage reciprocating compressor for biomethane grid injection. It is also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, and controlled by a PLC. Both compressors are designed for classified ATEX Zone 2 for outdoor installation (14/+104 °F).
View more
BVG315/ADI115
France
Two compressors located in France. The first is a screw compressor for biogas upgrading. It is air-cooled and equipped with fine filtration, heat recovery, temperature control, an electro-pneumatic bypass system, and controlled by a PLC. The second is a two-stage reciprocating compressor for biomethane grid injection. It is also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, and controlled by a PLC. Both compressors are designed for classified ATEX Zone 2 for outdoor installation (14/+104 °F).
View more