![](https://adicomp.us/wp-content/uploads/2023/02/220482-83CV_-1-1024x766.jpeg)
BIOGAS COMPRESSOR
UVG110
LOCATION: FRANCE
FLUID: Biogas
POWER INSTALLED: 2×175 hp
INLET PRESSURE: 2,18 psi(g)
WORKING PRESSURE: Up to 203,1 psi(g)
FLOW RATE: 0<199<399 SCFM
AMBIENT TEMPERATURE: -4/+104 °F
Two screw biogas compressors for upgrading located in France. Designed for classified Atex Zone 2 for indoor installation, completed with fully electrical by-pass valve and controlled by PLC.
[contact_form]
OTHER REFERENCES
ADI115-30
Netherlands
![](https://adicomp.us/wp-content/uploads/2024/07/adi115-netherlands.jpg)
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
View more
UVG 650
Denmark
![](https://adicomp.us/wp-content/uploads/2024/07/uvg650-dmt.jpg)
Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve, and are controlled by PLC.
View more
UVG 18.5
Germany
![](https://adicomp.us/wp-content/uploads/2024/07/UVG-18.5-germany.jpg)
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
View more
VG 55
Germany
![](https://adicomp.us/wp-content/uploads/2024/06/vg55-germany.jpg)
Screw compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
View more
UVG 355
Italy
![](https://adicomp.us/wp-content/uploads/2024/06/uvg355-italy.jpg)
Screw compressor for biogas upgrading located in Italy. Designed for outdoor installation. It is water cooled and completed with temperature control, fully electrical by-pass system, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise level to 75 dB@ 10m.
View more
BVG315/ADI115
France
![](https://adicomp.us/wp-content/uploads/2024/05/UVG315-ADI115.jpg)
Two compressors located in France. The first is a screw compressor for biogas upgrading. It is air-cooled and equipped with fine filtration, heat recovery, temperature control, an electro-pneumatic bypass system, and controlled by a PLC. The second is a two-stage reciprocating compressor for biomethane grid injection. It is also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, and controlled by a PLC. Both compressors are designed for classified ATEX Zone 2 for outdoor installation (14/+104 °F).
View more
BVG315/ADI115
France
![](https://adicomp.us/wp-content/uploads/2024/05/UVG315-ADI115.jpg)
Two compressors located in France. The first is a screw compressor for biogas upgrading. It is air-cooled and equipped with fine filtration, heat recovery, temperature control, an electro-pneumatic bypass system, and controlled by a PLC. The second is a two-stage reciprocating compressor for biomethane grid injection. It is also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, and controlled by a PLC. Both compressors are designed for classified ATEX Zone 2 for outdoor installation (14/+104 °F).
View more
BVG 30
Czech Republic
![](https://adicomp.us/wp-content/uploads/2024/05/BVG30.jpg)
Screw biogas compressor for upgrading located in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and equipped with medium filtration, bleed valve for depressurization to vent, mechanical by-pass valve and controlled by PLC. To reduce the compressed gas temperature, a chiller was provided along with the compressor.
View more
BVG132/BVG315
France
![](https://adicomp.us/wp-content/uploads/2024/05/plant-2.jpg)
A plant with five compressors located in France. All units are screw compressors for biogas upgrading. The compressors are designed for Atex Zone 2 for outdoor installations (-4/+104 °F). They are air-cooled, and equipped with heat recovery, electro-pneumatic bypass system, fine filtration, temperature control and controlled by PLC. All compressors canopies are equipped with two CH4 sensors.
View more
Model BVG 45
Poland
![](https://adicomp.us/wp-content/uploads/2024/04/2xbvg45.jpg)
Two screw compressors for biomethane located in Poland. Designed for classified area Atex Zone 2 for indoor installation. They are air cooled and equipped with medium filtration, bleed valve for depressurization to vent, mechanic by-pass valve and controlled by electrical board S1-20.
View more