BIOGAS COMPRESSORS

UVG315/BVG75

LOCATION: ITALY
FLUID: Biogas 

UVG 315                                                                                                    
POWER INSTALLED:
 315 kW
INLET PRESSURE: 400 mbar(g)
WORKING PRESSURE: Up to 15.5 bar(g)
FLOW RATE: 0<1715<1827 Nm³/h
AMBIENT TEMPERATURE: +3/+40 °C

BVG 75                                                                                                             
POWER INSTALLED:
 75 kW
INLET PRESSURE: 500 mbar(g)
WORKING PRESSURE: Up to 4.5 bar(g)
FLOW RATE: 0<550<644 Nm³/h
AMBIENT TEMPERATURE: +3/+40 °C

 

Two Screw compressors in series for biogas upgrading located in Italy. The first unit supplies the biogas to the upgrading system, the second recirculates the remaining methane and carbon dioxide to obtain greater efficiency for its recovery through the upgrading system. Both compressors are open frame, installed inside container, designed for classificated Atex Zone 2, completed with heat recovery, fine filtration and temperature control.

[contact_form]

OTHER REFERENCES

Model UVG 90

Italy

Screw biogas compressor for CO2 destined for the Italian market. Designed for installation in safe area outdoors. It is air-cooled and equipped with heat recovery, temperature control, fine filtration and controlled by PLC. The compressor uses food-grade oil.
View more

Model BVG 110

USA

Screw compressor for biogas upgrading destinated for US market. Designed in compliance with ASME and UL standards (Class 1 Division 2), for outdoor installation. It is air cooled and including fine filtration, electropneumatic by-pass valve and controlled by PLC.
View more

Model BVG 200

Colombia

Screw compressor for biogas upgrading located in Colombia. Designed for indoor installation, it is water cooled and completed with temperature control, electropneumatic by-pass valve and controlled by PLC.
View more

Model ADI115-30

Poland

Single-stage reciprocating compressor for natural gas installed in Poland. Designed for classified Atex Zone 2. It is air cooled and completed with fine filtration and electropneumatic by-pass valve. The electrical cabinet is designed for outdoor installation and controlled by PLC.
View more

Model HVG 90

France

Screw compressor for syngas, with a content of 40% of hydrogen, destined for the French market. Designed for classified Atex Zone 2 for indoor installation. It is water cooled completed with electropneumatic by-pass valve and controlled by PLC.
View more

Model BVG132/VG75

Latvia

Two open frame screw compressors for biogas upgrading. They are water cooled and equipped with heat recovery, electro-pneumatic by-pass system, fine filtration and controlled by PLC and one open frame  screw compressor for biomethane grid injection, It is water cooled and equipped with fine filtration, electro-pneumatic by-pass system and controlled by PLC. All compressors are designed for classified Atex Zone 2 for indoor installation (+37,4/+104 °F). 
View more

Model BVG 90

USA

Screw compressor for biogas upgrading located in USA. Designed in compliance with ASME and UL standards for outdoor installation, It is air cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve and controlled by PLC.
View more

Model UVG 650

Italy

Screw compressor for biogas upgrading installed inside a container (40') destined for the Italian market. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve and controlled by PLC.
View more

Model UVG 550

USA

Two screw compressors for biogas upgrading installed inside a container (45’) destinated for US market. Designed in compliance with US standards, suitable for outdoor installation, water-cooled, completed with electro-pneumatic by-pass system, temperature control, fine filtration and PLC-controlled with control cabinet integrated in the container.
View more

Model UVG 200

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve and controlled by PLC.
View more

Contact us

Write us for support or information