Line: BVG/UVG

BIOGAS COMPRESSOR UVG500 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 850 hpINLET PRESSURE: 0,73 psi(g)WORKING PRESSURE: Up to 58 psi(g)FLOW RATE: 0<841<1682 SCFMAMBIENT TEMPERATURE: +37,4/+113 °F Screw compressor for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for indoor installation, water-cooled, equipped with post-compression treatment and controlled by PLC.

BIOGAS COMPRESSORS UVG160/BVG75 LOCATION: ITALYFLUID: Biogas  UVG 160                                                                                                    POWER… Continue reading UVG160/BVG75-Italy

BIOGAS COMPRESSOR UVG132 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 220 hpINLET PRESSURE: 1,5 psi(g)WORKING PRESSURE: Up to 232 psi(g)FLOW RATE: 0<221<443 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw compressor for biogas upgrading located in USA. Designed in compliance with North American standards, suitable for outdoor installation, completed fine filtration and temperature control.

BIOGAS COMPRESSOR UVG250 LOCATION: DENMARKFLUID: BiogasPOWER INSTALLED: 430 hpINLET PRESSURE: 1 psi(g)WORKING PRESSURE: Up to 224,8 psi(g)FLOW RATE: 0<430<860 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw compressor for biogas upgrading located in Denmark. Designed for classificated Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers for reducing the noise level to 80 dB(A)… Continue reading UVG250-Denmark

BIOGAS COMPRESSOR UVG160 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 270 hpINLET PRESSURE: 1,5 psi(g)WORKING PRESSURE: Up to 239,3 psi(g)FLOW RATE: 0<526 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw compressor for biogas upgrading located in France. Designed for classificated Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers.

BIOGAS COMPRESSOR UVG110 LOCATION: FranceFLUID: BiogasPOWER INSTALLED: 220 hpINLET PRESSURE: 1,5 psi(g)WORKING PRESSURE: up to 217,6 psi(g)FLOW RATE: 0<436 SCFMAMBIENT TEMPERATURE: -4/+104 °F Screw biogas compressor for upgrading installed in France. Designed for classified Atex Zone 2 for outdoor installation, completed with filtration and heat recovery.

BIOGAS COMPRESSOR UVG160 LOCATION: FranceFLUID: BiogasPOWER INSTALLED: 270 hp (each one)INLET PRESSURE: 2,2 psi(g)WORKING PRESSURE:  up to 203,1 psi(g)FLOW RATE: 0<279<559 SCFM (each one)AMBIENT TEMPERATURE: +14/+104 °F Two screw biogas compressors for upgrading installed in anaerobic digestion plant located in France. Air cooled, equipped with stainless steel heat exchanger for heat recovery, completed with fine filtration and sound proof and weather… Continue reading UVG160-France

BIOGAS COMPRESSORS UVG110/BVG30 LOCATION: ItalyFLUID: Biogas UVG 110POWER INSTALLED: 175 hpINLET PRESSURE: 5,8 psi(g)WORKING PRESSURE:  145-174 psi(g)FLOW RATE: 0<483 SCFMAMBIENT TEMPERATURE: +14/+104 °F BVG 30POWER INSTALLED: 30 kWINLET PRESSURE: 500 mbar(g)WORKING PRESSURE:  3.2-5.0 bar(g)FLOW RATE: 0<250 Nm³/hAMBIENT TEMPERATURE: +14/+104 °F Two open frame screw compressors for biogas upgrading suitable for membrane application and installed inside a container. Designed for classified Atex Zone 2 and suitable… Continue reading UVG110/BVG30-Italy

BIOGAS COMPRESSOR UVG400 LOCATION: SwedenFLUID: BiogasPOWER INSTALLED: 680 hpINLET PRESSURE: 4,4 psi(g)WORKING PRESSURE:  200,1-207,4 psi(g)FLOW RATE: 0<863<1726 SCFMAMBIENT TEMPERATURE: -40/+104 °F Screw biogas compressor for upgrading installed in container 20″ equipped with silencers for noise reduction down to 80 dB1m. Designed for classified Atex Zone 2, suitable for outdoor installation -40/+104 °F, completed with heat recovery system and controlled by PLC.